You have selected

Wiko Lenny 3 Wiko Lenny 3

Select another device

Wiko Lenny 3 MMS Manual configuration

Wiko Lenny 3
Wiko Lenny 3 - MMS - Manual configuration - Step 1
  • MMS settings can be sent to your Wiko Lenny 3 via SMS. Click here for instructions.
  • You can also configure your phone manually for MMS. Follow the step-by-step instructions below.
Wiko Lenny 3 - MMS - Manual configuration - Step 2
* Go to the Start screen. * Choose *My Apps*.
Wiko Lenny 3 - MMS - Manual configuration - Step 3
* Scroll down. * Choose *Settings*.
Wiko Lenny 3 - MMS - Manual configuration - Step 4
* Choose *More*.
Wiko Lenny 3 - MMS - Manual configuration - Step 5
* Choose *Mobile networks*.
Wiko Lenny 3 - MMS - Manual configuration - Step 6
* Choose a SIM card, in this case *SIM 1*.
Wiko Lenny 3 - MMS - Manual configuration - Step 7
* Choose *Access point names*.
Wiko Lenny 3 - MMS - Manual configuration - Step 8
* Choose the plus symbol.
Wiko Lenny 3 - MMS - Manual configuration - Step 9
* Under *Name*, enter BASE MMS * Under *APN*, enter mms.base.be (be aware of the dots) * Choose *APN type*.
Wiko Lenny 3 - MMS - Manual configuration - Step 10
* If this screen appears, tick *mms* and choose *OK*. * If this screen does not appear, enter mms (note: in lower case) and choose *OK*.
Wiko Lenny 3 - MMS - Manual configuration - Step 11
* Under *Username*, enter base * Under *Password*, enter base
Wiko Lenny 3 - MMS - Manual configuration - Step 12
* Scroll down. * Under *MMSC*, enter http://mmsc.base.be (be aware of the dots) * Under *MMS proxy*, enter 217.72.235.1 (be aware of the dots) * Under *MMS port*, enter 8080
Wiko Lenny 3 - MMS - Manual configuration - Step 13
* Under *MCC*, enter 206 * Under *MNC*, enter 20 * Under *Authentication type*, choose PAP.
Wiko Lenny 3 - MMS - Manual configuration - Step 14
* Choose the options symbol.
Wiko Lenny 3 - MMS - Manual configuration - Step 15
* Choose *Save*.
Wiko Lenny 3 - MMS - Manual configuration - Step 16
* Return to the Start screen.
Wiko Lenny 3 - MMS - Manual configuration - Step 17
* To reboot the Wiko Lenny 3, press and hold the power button on the side of the Wiko Lenny 3.
Wiko Lenny 3 - MMS - Manual configuration - Step 18
* Choose *Reboot*.
Wiko Lenny 3 - MMS - Manual configuration - Step 19
* Choose *OK*.
Wiko Lenny 3 - MMS - Manual configuration - Step 20
* The Wiko Lenny 3 will automatically reboot.
Wiko Lenny 3 - MMS - Manual configuration - Step 21
* If this screen appears, enter the PIN code and choose the tick symbol. * If this screen does not appear, go to the next step.
Wiko Lenny 3 - MMS - Manual configuration - Step 22
* If this screen appears, enter the PIN code and choose the tick symbol. * If this screen does not appear, go to the next step.
Wiko Lenny 3 - MMS - Manual configuration - Step 23
* If this screen appears, drag the lock symbol up to unlock it. * If this screen does not appear, go to the next step.
Wiko Lenny 3 - MMS - Manual configuration - Step 24
* The Wiko Lenny 3 has now been configured for use of mobile internet.
Wiko Lenny 3 - MMS - Manual configuration - Step 25
  • Start screen.
  • Switch the Wiko Lenny 3 off and then on again to activate the settings.
  • Note: Activation is only complete after sending a first MMS. Test the settings by sending an MMS to your own phone number.
Wiko Lenny 3 - MMS - Manual configuration - Step 26
  • If the MMS is successful, you will receive a confirmation within a few minutes. Check the messages inbox of your Wiko Lenny 3 if you have received the MMS.
  • For step-by-step instructions on how to create and send an MMS, click here.
Previous Step 1 of 26 Next