Huawei P9 Lite
- MMS settings can be sent to your Huawei P9 Lite via SMS. Click here for instructions.
- You can also configure your phone manually for MMS. Follow the step-by-step instructions below.
- Go to the Start screen.
- Scroll to the right.
- Choose Access Point Names.
- Under Name, enter BASE MMS
- Under APN, enter mms.base.be (be aware of the dots)
- Under Username, enter base
- Under Password, enter base
- Scroll down.
- Under MMSC, enter http://mmsc.base.be (be aware of the dots)
- Under MMS proxy, enter 220.127.116.11 (be aware of the dots)
- Under MMS port, enter 8080
- Under MCC, enter 206
- Under MNC, enter 20
- Under Authentication type, choose PAP.
- Choose APN type.
- If this screen appears, enter mms (note: in lower case) and choose OK.
- If this screen does not appear, tick MMS and choose OK.
- Return to the Start screen.
- To reboot the Huawei P9 Lite, press and hold the power button on the side of the Huawei P9 Lite.
- The Huawei P9 Lite will automatically reboot.
- If this screen appears, enter the PIN code and choose the enter key.
- If this screen does not appear, go to the next step.
- The Huawei P9 Lite has now been configured for use of MMS.
- Start screen.
- Switch the Huawei P9 Lite off and then on again to activate the settings.
- Note: Activation is only complete after sending a first MMS. Test the settings by sending an MMS to your own phone number.
- If the MMS is successful, you will receive a confirmation within a few minutes. Check the messages inbox of your Huawei P9 Lite if you have received the MMS.
- For step-by-step instructions on how to create and send an MMS, click here.