You have selected

Apple iPhone SE (2020) MMS Manual configuration

Apple iPhone SE (2020) - MMS - Manual configuration - Step 1
* MMS settings can be sent to your Apple iPhone SE (2020) via SMS. * You can also configure your phone manually for MMS. Follow the step-by-step instructions below.
Apple iPhone SE (2020) - MMS - Manual configuration - Step 2
* Go to the Start screen. * Choose *Settings*.
Apple iPhone SE (2020) - MMS - Manual configuration - Step 3
* Scroll down. * Choose *Mobile Data*.
Apple iPhone SE (2020) - MMS - Manual configuration - Step 4
* Choose *Mobile Data Network*. * If *Mobile Data Network* is not available, manual configuration is not possible. In this case, connect the device to the computer and use iTunes to install the 'Carrier Settings'.
Apple iPhone SE (2020) - MMS - Manual configuration - Step 5
* Edit the details for *MMS* as follows: * Under *APN*, enter mms.base.be (be aware of the dots) * Under *Username*, enter base * Under *Password*, enter base
Apple iPhone SE (2020) - MMS - Manual configuration - Step 6
* Under *MMSC*, enter http://mmsc.base.be (be aware of the dots) * Under *MMS Proxy*, enter 217.72.235.1 (be aware of the dots):8080 * Under *MMS Max Message Size*, enter 300000
Apple iPhone SE (2020) - MMS - Manual configuration - Step 7
* Choose *Mobile Data*.
Apple iPhone SE (2020) - MMS - Manual configuration - Step 8
* Return to the Start screen. * To finish the process and activate the settings, you need to restart the device. Your Apple iPhone SE (2020) will then be configured to use MMS. * For instructions on how to restart your device, follow the next steps.
Apple iPhone SE (2020) - MMS - Manual configuration - Step 9
* To turn off the Apple iPhone SE (2020), press and hold the power button on the side of the device.
Apple iPhone SE (2020) - MMS - Manual configuration - Step 10
* Drag the on/off symbol to the right.
Apple iPhone SE (2020) - MMS - Manual configuration - Step 11
* The Apple iPhone SE (2020) has been turned off.
Apple iPhone SE (2020) - MMS - Manual configuration - Step 12
* To turn on the Apple iPhone SE (2020), press and hold the power button on the side of the device.
Apple iPhone SE (2020) - MMS - Manual configuration - Step 13
* If this screen appears, press the home key. * If this screen does not appear, go to the next step.
Apple iPhone SE (2020) - MMS - Manual configuration - Step 14
* If this screen appears, enter the PIN code and choose *OK*. * If this screen does not appear, go to the next step.
Apple iPhone SE (2020) - MMS - Manual configuration - Step 15
* The Apple iPhone SE (2020) is now ready for use.
Apple iPhone SE (2020) - MMS - Manual configuration - Step 16
* Start screen. * Switch the Apple iPhone SE (2020) off and then on again to activate the settings. * Note: Activation is only complete after sending a first MMS. Test the settings by sending an MMS to your own phone number.
Apple iPhone SE (2020) - MMS - Manual configuration - Step 17
* If the MMS is successful, you will receive a confirmation within a few minutes. Check the messages inbox of your Apple iPhone SE (2020) if you have received the MMS.
Previous Step 1 of 17 Next