iPhone 6s iOS 10
- MMS settings can be sent to your Apple iPhone 6s via SMS. Click here for instructions.
- You can also configure your phone manually for MMS. Follow the step-by-step instructions below.
- Go to the Start screen.
- Choose Settings.
- Choose Mobile Data Options.
- Choose Mobile Data Network.
- If Mobile Data Network is not available, manual configuration is not possible. In this case, connect the device to the computer and use iTunes to install the ‘Carrier Settings’.
- Edit the details for MMS as follows:
- Under APN, enter mms.base.be (be aware of the dots)
- Under Username, enter base
- Under Password, enter base
- Scroll down.
- Under MMSC, enter http://mmsc.base.be (be aware of the dots)
- Under MMS Proxy, enter 220.127.116.11 (be aware of the dots):8080
- Under MMS Max Message Size, enter 300000
- Return to the Start screen.
- To turn off the Apple iPhone 6s, press and hold the power button on the side of the Apple iPhone 6s.
- Drag the on/off symbol to the right.
- The Apple iPhone 6s has been turned off.
- To turn on the Apple iPhone 6s, press and hold the power button on the side of the Apple iPhone 6s.
- If this screen appears, press the home key.
- If this screen does not appear, go to the next step.
- If this screen appears, choose Unlock.
- If this screen does not appear, skip the next steps.
- The Apple iPhone 6s has now been configured for use of MMS.
- Start screen.
- Switch the Apple iPhone 6s off and then on again to activate the settings.
- Note: Activation is only complete after sending a first MMS. Test the settings by sending an MMS to your own phone number.
- If the MMS is successful, you will receive a confirmation within a few minutes. Check the messages inbox of your Apple iPhone 6s if you have received the MMS.
- For step-by-step instructions on how to create and send an MMS, click here.