iPhone 6 Plus
- MMS settings can not be sent to your Apple iPhone 6 Plus via SMS.
- You can configure your phone manually for MMS. Follow the step-by-step instructions below.
- Go to the Start screen.
- Choose Settings.
- If Cellular Data is disabled, enable Cellular Data.
- If Cellular Data is enabled, go to the next step.
- Choose Cellular Data Network.
- If Cellular Data Network is not available, manual configuration is not possible. In this case, connect the device to the computer and use iTunes to install the ‘Carrier Settings’.
- Edit the details for MMS as follows:
- Under APN, enter mms.base.be (be aware of the dots)
- Under Username, enter base
- Under Password, enter base
- Under MMSC, enter http://mmsc.base.be (be aware of the dots)
- Under MMS Proxy, enter 188.8.131.52 (be aware of the dots):enter 8080
- Under MMS Max Message Size, enter 300000
- The Apple iPhone 6 Plus has now been configured for use of MMS.
- Return to the Start screen.
- Start screen.
- Switch the Apple iPhone 6 Plus off and then on again to activate the settings.
- Note: Activation is only complete after sending a first MMS. Test the settings by sending an MMS to your own phone number.
- If the MMS is successful, you will receive a confirmation within a few minutes. Check the messages inbox of your Apple iPhone 6 Plus if you have received the MMS.
- For step-by-step instructions on how to create and send an MMS, click here.